Toro Greensmaster TriFlex 3400 Series - Installing the Cutting Units (Cont.); Installing Reel Motor

g014602
Figure10
1.Footrest—closed2.Footrest—open
4.Positionthecuttingunitunderthesuspension
arm.
5.Withthelatchesonthesuspension-armbar
pointingup(i.e.,open)(Figure11),pushthe
suspensionarmdownsothatthebartsover
thebaracrossthetopofthecuttingunit(Figure
12).
g014609
Figure11
1.Latch—closedposition3.Latch—openposition
2.Suspension-armbar
g014611
Figure12
1.Suspension-armbar2.Cutting-unitbar
6.Closethelatchesdownandaroundthe
cutting-unitbarandlocktheminplace(Figure
11).
Note:A“click”canbeheardandfeltwhenthe
latchesareproperlylockedinplace.
7.Coatthesplineshaftofthecuttingunitmotor
withcleangrease(Figure13).
8.Insertthemotorintotheleftsideofthecutting
unit(asviewedfromtheoperator'sposition)and
pullthemotorretainingbaronthecuttingunit
towardthemotoruntilyouhearanaudible“click”
frombothsidesofthemotor(Figure13).
g014690
Figure13
1.Reelmotor
3.Cavity
2.Splineshaft
4.Motorretainingbar
9.Mountagrassbasketontothebaskethookson
thesuspensionarm.
10.Repeatthisprocedurefortheothercuttingunits.
17