Toro Greensmaster TriFlex 3400 Series - Installing and Removing the Cutting Units (Cont.); Removing the Cutting Units

g014690
Figure34
1.Reelmotor
3.Cavity
2.Splineshaft
4.Motorretainingbar
7.Mountagrassbasketontothebaskethookson
thesuspensionarm.
8.Repeatthisprocedurefortheothercuttingunits.
RemovingtheCuttingUnits
1.Parkthemachineonacleanlevelsurface,
lowerthecuttingunitstothegrounduntilthe
suspensionhydraulicsarefullyextended,stop
theengine,andsettheparkingbrake.
2.Pushthemotorretainingbaroutoftheslotson
themotortowardsthecuttingunitandremove
themotorfromthecuttingunit.
g014605
Figure35
1.Reelmotor2.Motorretainingbar
3.Movethemotortothestoragelocationonthe
frontofthesuspensionarm(Figure36).
g014608
Figure36
Note:Whensharpening,settingthe
height-of-cut,orperformingothermaintenance
proceduresonthecuttingunits,storethecutting
unitreelmotorsinthestoragelocationonthe
frontofthesuspensionarmstopreventdamage
tothem.
Important:Donotraisethesuspensionto
thetransportpositionwhenthereelmotors
areintheholdersinthemachineframe.
Damagetothemotorsorhosescouldresult.
Ifyoumustmovethetractionunitwithout
thecuttingunitsinstalled,securethemto
thesuspensionarmsusingcableties.
30