Toro Greensmaster TriFlex 3400 - Lift Control Manifold Service

Greensmaster 3300/3400Hydraulic System Page 5 -- 98
Lift Control Manifold Service
1. Lift manifold
2. Zero leak plug (5 used)
3. Orifice (0.028) (ports C4 and C6)
4. 90
o
fitting
5. Solenoid valve (port S2)
6. Solenoid valve (port S4)
7. Solenoid coil
8. Nut
9. Solenoid coil (3 used)
10. Coil spacer
11. Nut
12. Relief valve (port RV)
13. Solenoid valve (port S1)
14. Solenoid valve (port S3)
15. Check valve (port CV)
16. 45
o
fitting
17. Orifice (0.037) (port C2)
25 ft--lb
(34 N--m)
60 in--lb
(6.7 N--m)
20 ft--lb
(27 N--m)
UP
VIEW FROM
BELOW
Figure 71
2
6
8
9
10
11
13
1
5
7
12
14
15
16
4
2
2
3
8
9
9
10
17
3
20 ft--lb
(27 N--m)
20 ft--lb
(27 N--m)
60 in--lb
(6.7 N--m)
20 ft--lb
(27 N--m)
20 ft--lb
(27 N--m)
NOTE: Theportsontheliftcontrolmanifoldaremarked
for easy identification of components. Example: S1 is
thesolenoidvalveandPis thesupplyport(seeHydrau-
lic Schematic to identify the function of the hydraulic
lines and cartridge valves at each port location).