Greensmaster 3300/3400Hydraulic System Page 5 -- 114
4. Connectoverflowhose(item4)toleak detectortank
barb and secure with hose clamp (item 3).
5. Apply antiseize lubricant to the end threads of the
four(4)capscrews(item6)usedtosecureleakdetector
tank to hydraulic reservoir.
IMPORTANT: Donotover--tightencap screwswhen
securing leak detector tank to hydraulic reservoir.
Threads in reservoir may become damaged.
6. Secure leakdetector tank tohydraulic reservoirw ith
four spacers (item 9), neoprene washers (item 8), flat
washers (item 7) and cap screws (item 6). Torque cap
screws from 30 to 50 in--lb (3.4 to 5.6 N--m).
NOTE: Monitor hydraulic fluid level in leak detector
tankwindow.Asairisremovedfromthehydrauliccircuit,
additional oil may have to be added to reservoir.
7. Removecapfrommainhydraulicreservoirandslow-
ly fill to cold fill level mark next to sight window on leak
detector tank.
8. Verify leak detector operation.
To Next Page
Loading...
