Greensmaster 3300/3400Page 1 -- 2Safety
General Safety Instructions
Greensmaster TriFlex 3300 and 3400 machines have
been tested and certified by TORO for compliance with
existing safety standards and specifications. Although
hazardcontroland accidentprevention partiallyare de-
pendent upon the design and configuration of the ma-
chine, these factors are also dependent upon the
awareness, concern and proper training of the person-
nel involved in the operation, transport, maintenance
and storage of the machine. Improper use or mainte-
nanceofthemachinecanresultininjuryordeath.Tore-
duce the potential for injury or death, comply with the
following safety instructions.
WARNING
To reduce the potential for injury or death,
comply with the f ollowing safety instructions.
Before Operating
1. Review and understand the contents of the Opera-
tor’s Manuals and Operator’s DVD before starting and
operatingthe vehicle.Become familiarwith thecontrols
and know how to stop the vehicle and engine quickly.
AdditionalcopiesoftheOperator’sManualareavailable
on the internet at www.Toro.com.
2. Keep allshields,safetydevices anddecals in place.
Ifashield,safetydeviceordecalisdefective,illegibleor
damaged, repair or replace it before operating the ma-
chine.Alsotightenanyloosenuts,boltsorscrewstoen-
sure machine is in safe operating condition.
3. Assure interlock switches are adjusted correctly so
engine cannot be started unless traction pedal is in
NEUTRAL and cutting units are DISENGAGED.
4. Since fuel is flammable, handle it carefully:
A. Use an approved fuel container.
B. Donotremovefueltankcapwhileengineishotor
running.
C. Do not smoke while handling fuel.
D. Fillfueltankoutdoorsandonlytowithinaninchof
the top of the tank, not the filler neck. Do not overfill
the fuel tank.
E. Wipe up any spilled fuel.
To Next Page
Loading...
