Toro Greensmaster TriFlex 3400 - Installing the Roll Bar; Installing the Seat; Installing the Service and Clip Decals

Description
Qty.
Use
DeclarationofConformity
1
Noiseratingcerticate
1
ForCEcompliance.
Ignitionkeys2
Starttheengine.
1
InstallingtheRollBar
Partsneededforthisprocedure:
1Rollbar
4
Bolt(1/2x3-3/4inches)
4
Flangenut(1/2inch)
Procedure
1.Removethetopcratesupportfromthecrate.
2.Removetherollbarfromthecrate.
3.Use4bolts(1/2x3-3/4inches)and4ange
nuts(1/2inch)toinstalltherollbarintothe
ROPSbracketsoneachsideofthemachineas
showninFigure3.
g233739
Figure3
1.Rollbar
3.ROPSbracket
2.Bolt(1/2x3-3/4inches)4.Flangenut(1/2inch)
4.Torquethefastenersto136to149N∙m(100to
110ft-lb).
2
InstallingtheSeat
Partsneededforthisprocedure:
1
SeatKit(orderseparately;contactyourauthorized
Torodistributor)
Procedure
Acquireyourdesiredseatkitfromyourdistributorand
installittothemachine;refertothekitInstallation
Instructions.
3
InstallingtheServiceand
ClipDecals
Partsneededforthisprocedure:
1
Servicedecal(PartNo.139-2728)
1
Clipdecal(115-8156)
Procedure
Installtheservicedecal(PartNo.139-2728)andthe
clipdecal(PartNo.115-8156)totheseat;referto
Figure4forthepremiumseat(ModelNo.04719)or
Figure5forthestandardseat(ModelNo.04508).
10