Toro Greensmaster TriFlex 3400 - Page 45

g014596
Figure45
1.Prop(notprovided)
2.Bedbar-adjusting-screw
nut(2)
InstallingtheCuttingUnits
1.Liftuponthefootrestandswingitopen,allowing
accesstothecentercuttingunitposition(Figure
46).
CAUTION
Thefootrestcanpinchngersifitfalls
intotheclosedposition.
Keepyourngersclearoftheareawhere
thefootrestseatswhileitisopen.
g014602
Figure46
1.Footrest—closed2.Footrest—open
2.Positionthecuttingunitunderthecenter
suspensionarm.
3.Withthelatchesonthesuspension-armbar
pointingup(i.e.,open)(Figure47),pushthe
suspensionarmdownsothatthebartsover
thebaracrossthetopofthecuttingunit(Figure
48).
g014609
Figure47
1.Latch—closedposition3.Latch—openposition
2.Suspension-armbar
g014611
Figure48
1.Suspension-armbar2.Cutting-unitbar
4.Closethelatchesdownandaroundthe
cutting-unitbarandlocktheminplace(Figure
47).
Note:Youcanhearaclickandfeelwhenthe
latchesareproperlylockedinplace.
5.Coatthesplineshaftofthecuttingunitmotor
withcleangrease(Figure49).
6.Insertthemotorintotheleftsideofthecutting
unit(asviewedfromtheoperator'sposition)and
pullthemotorretainingbaronthecuttingunit
towardthemotoruntilyouhearaclickfromboth
sidesofthemotor(Figure49).
45