g014690
Figure49
1.Reelmotor
3.Cavity
2.Splineshaft
4.Motor-retainingbar
7.Mountagrassbasketontothebaskethookson
thesuspensionarm.
8.Repeatthisprocedurefortheothercuttingunits.
RemovingtheCuttingUnits
1.Parkthemachineonacleanlevelsurface,
lowerthecuttingunitstothegrounduntilthe
suspensionhydraulicsarefullyextended,set
theparkingbrake,shutofftheengine,and
removethekey.
2.Pushthemotorretainingbaroutoftheslotson
themotortowardthecuttingunitandremove
themotorfromthecuttingunit.
g014605
Figure50
1.Reelmotor2.Motor-retainingbar
3.Movethemotortothestoragelocationonthe
frontofthesuspensionarm(Figure51).
g014608
Figure51
Note:Whensharpening,settingtheheight
ofcut,orperformingothermaintenance
proceduresonthecuttingunits,storethecutting
unitreelmotorsinthestoragelocationonthe
frontofthesuspensionarmstopreventdamage
tothem.
Important:Donotraisethesuspensionto
thetransportpositionwhenthereelmotors
areintheholdersinthemachineframe.
Damagetothemotorsorhosescouldresult.
Ifyoumustmovethetractionunitwithout
thecuttingunitsinstalled,securethemto
thesuspensionarmsusingcableties.
4.Openthelatchesonthesuspension-armbarof
thecuttingunityouareremoving(Figure47).
5.Disconnectthelatchesfromthecutting-unitbar.
6.Rollthecuttingunitoutfromunderthe
suspensionarm.
7.Repeatsteps2through6fortheothercutting
unitsasrequired.
46
To Next Page
Loading...
