Contents
Contents 2
Introduction 3
Safety 4
Safe Operating Practices 4
Safety and Instruction Decals 8
Specifications 11
Before Operating 13
Hood Prop 13
Check the Engine Oil 13
Filling the Fuel Tank 13
Check the Cooling System 14
Checking the Hydraulic System Oil 14
Operation 16
Controls 16
Starting/Stopping the engine 18
Bleeding the Fuel System 19
Checking the Interlock Switches 19
Pushing or Towing the Traction Unit 20
Operating Characteristics 20
Maintenance 22
Recommended Maintenance Schedule 22
Daily Maintenance Checklist 23
Lubricating the Machine 23
General Air Cleaner Maintenance 24
Servicing the Air Cleaner 24
Cleaning the Radiator and Screen 25
Changing Engine Oil and Filter 25
Servicing the Fuel System 26
Cleaning Radiator and Screen 27
Changing Coolant in the Cooling System 27
Servicing the Engine Belts 28
Adjusting the Throttle 29
Adjusting the Traction Control Rod 29
Adjusting the Traction Pedal Friction Wheel 30
Adjusting the Traction Drive for Neutral 30
Adjusting the Traction Interlock Switch 31
Replacing the Power Take-Off Switch 32
Correcting Power Take-Off Drive
Belt Slippage 32
Adjusting the Parking Brake Interlock
Switch 32
Adjusting the Tilt Steering Control 33
Adjusting Rear Wheel Toe-In 33
Adjusting the Rear Wheel Bearings 34
Adjusting the Brakes 34
Adjusting the Lift Lever Latch 35
Replacing the Hydraulic Oil Filter 36
Changing the Hydraulic System Oil 36
Fuses 37
Servicing the Battery 37
Seasonal Storage 38
Traction Unit 38
Engine 38
©2001 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
All Rights Reserved
2