Toro Groundsmaster 4100-D 30411 - Hydraulic System Test Ports

Hydraulicuidescapingunderpressurecan
penetrateskinandcauseinjury.
•Makesureallhydraulicuidhosesand
linesareingoodconditionandallhydraulic
connectionsandttingsaretightbefore
applyingpressuretothehydraulicsystem.
•Keepyourbodyandhandsawayfrompin
holeleaksornozzlesthatejecthighpressure
hydraulicuid.
•Usecardboardorpapertondhydraulic
leaks.
•Safelyrelieveallpressureinthehydraulic
systembeforeperforminganyworkonthe
hydraulicsystem.
•Seekimmediatemedicalattentionifuid
isinjectedintoskin.
HydraulicSystemTestPorts
Thetestportsareusedtotestthepressureinthe
hydrauliccircuits.ContactyourlocalTorodistributor
forassistance.
TestPortA(Figure70),locatedontheleftsideof
themachine,isusedtomeasuretheforwardtraction
pressure.
Figure70
1.TestportA
TestPortB(Figure71),locatedontherightsideof
themachine,isusedtomeasurethereversetraction
pressure.
Figure71
1.TestportB
TestPortC(Figure72),locatedontheleftsideofthe
machine,isusedtomeasuretheleftcuttingunitpressure.
Figure72
1.TestportC
TestPortD(Figure73),locatedontherightsideof
themachine,isusedtomeasuretherightcuttingunit
pressure.
Figure73
1.TestportD
TestPortE(Figure74),locatedundertheradiator,is
usedtomeasurethefour-wheeldrivepressureinreverse.
50