Toro Groundsmaster 4500-D - After Operation Safety; General After-Operation Safety and Lanyard Use

AfterOperation
GeneralSafety
•Shutofftheengine,removethekey,andwait
forallmovementtostopbeforeyouleavethe
operator’sposition.Allowthemachinetocool
beforeadjusting,servicing,cleaning,orstoringit.
•Cleangrassanddebrisfromthecuttingunits,
mufers,andenginecompartmenttohelpprevent
res.Cleanupoilorfuelspills.
•Ifthecuttingunitsareinthetransportposition,use
thepositivemechanicallock(ifavailable)before
youleavethemachineunattended.
•Allowtheenginetocoolbeforestoringthemachine
inanyenclosure.
•Removethekeyandshutoffthefuel(ifequipped)
beforestoringorhaulingthemachine.
•Neverstorethemachineorfuelcontainerwhere
thereisanopename,spark,orpilotlight,such
asonawaterheateroronotherappliances.
•Maintainandcleantheseatbelt(s)asnecessary
UsingtheCutting-Unit
StorageLanyard
Usethecutting-unitstoragelanyardstopreventthe
forwardoutercuttingunitsfromsettlingwhenthe
machineisparkedovernightorifitisbeingstoredfor
anextendedperiod.Youcanalsousethecutting-unit
storagelanyardstopreventthecuttingunitsfrom
settlingwhilethemachineistransportingbetween
mowingtasks.
g225484
Figure70
SecuringtheCuttingUnits
1.EnsurethatthePTOisdisengaged.
2.Parkthemachineonalevelsurface.
3.Engagetheparkingbrake.
4.Fullyraisethecuttingunits.
5.Alignthelanyardtothecarriershaftofthelift
armfortheforwardouter-cuttingunit(Figure71).
g225483
Figure71
1.Carrier-shaftgroove
(forwardouter-liftarm)
2.Lanyardloop
6.Sliptheloopinthelanyardoverthecarriershaft
untilthelanyardisfullyseatedinthegroovein
theshaft(Figure71).
7.Repeatsteps5and6fortheforward
outer-cuttingunitattheothersideofthe
machine.
Important:Removethelanyardsfromthecarrier
shaftsbeforeloweringthecuttingunits
StowingtheLanyards
Note:Stowthelanyardswhenyouarenotusing
them.
1.EnsurethatthePTOisdisengaged.
2.Parkthemachineonalevelsurface.
3.Engagetheparkingbrake.
55