Multi Pro 1200/1250Page 6 -- 2Spray System
Specifications
Item Description
Spray Pump Diaphragm Pump, 18 GPM @ 220 PSI
(26 GPM @ 0 PSI)
Spray Pressure Relief Valve Poppet Style, 220 PSI Maximum
Sprayer Tank 175 Gallon, Polyethylene
Suction Strainer 50 Mesh, Stainless Steel, Tank Mounted
(30 Mesh and 80 Mesh Optional)
General Information
Precautions Concerning Chemicals Used in Spray System
Chemicals can injure persons, animals,plants, soil and
otherproperty.To eliminateenvironmental damageand
personal injury:
1. Select the proper chemical for the job.
2. Carefully readthedirections printedon thechemical
manufacturer’s labels before handling chemicals. In-
structions on chemical manufacturer’s container labels
regardingmixingproportionsshouldbereadandstrictly
followed.
3. Keepspraymaterialawayfromskin.Ifspraymaterial
comes in contact with a person, wash it off immediately
in accordance with manufacturer’s recommendations
(refer to container labels and Material Safety Data
Sheets).
4. Always wear protective clothing, chemical resistant
gloves, eye protection and other personal protective
equipmentasrecommendedbythechemicalmanufac-
turer.
5. Properly dispose of chemical containers, unused
chemicals and chemical solution.
Precautions for Removing or Adjusting Spray System Components
1. Stop the v ehicle and set the parking brake.
2. Shut off the vehicle’s engine and remove the key
from the ignition switch.
3. Disengage all power and wait until all moving parts
have stopped.
4. Remove chemicals from pump, hoses and other
spray components. Thoroughly neutralize and rinse
spray system before loosening or removing any spray
system component(s).
5. Make sure system pressure is relieved before loos-
ening any system component (e.g. spray valves, spray
system hose).
To Next Page
Loading...
