Multi Pro 1200/1250 Page 6 -- 31 Spray System
Disassembly (Fig. 31)
IMPORTANT: Make sure to remove and neutralize
chemicals from spray components before disas-
sembly. Wear protective clothing, chemical resist-
ant gloves and eye protection during repair.
1. Remove master boom valve from machine (see
Spray Control (Multi Pro 1200) in this section).
2. Disassemble master boom valve using Figure 31 as
a guide. Discard all removed O--rings.
Assembly (Fig. 31)
NOTE: CoatallO--ringswithvegetableoilbeforeinstal-
lationtoreducethechanceofdamageduringassembly.
1. Assemble master boom valve using Figure 31 as a
guide. Replace all removed O--rings.
2. Install master boom valve to machine (see Spray
Control (Multi Pro 1200) in this section).
1. Master boom valve
Figure 32
1
FRONT
Spray
System
To Next Page
Loading...
