Toro Multi Pro 1200 - Page 195

Multi Pro 1200/1250 Page 7 -- 33 Drive Train
10.Loosen five (5) cap screws (item 1) and remove dif-
ferential carrier with L.H. axle shaft assembly (item 2)
and shims (item 3) from side cover (item 4).
1
3
2
4
Figure 40
11.Loosen cap screws (item 1) and remove side cover
(item 2) from transaxle case. Note locations of two (2)
dowel pins (item 3) in transaxle case.
12.Inspectsidecoverforcracksordamageandreplace
if necessary.
2
1
3
Figure 41
13.Loosen cap screws (item 1) and remove R.H. axle
shaft assembly (item 2) from transaxle case.
2
1
Figure 42
14.Slide differential gear assembly (item 1) from trans-
axle case.
1
Figure 43
Drive Train