Toro Multi Pro 1200 - Page 199

Multi Pro 1200/1250 Page 7 -- 37 Drive Train
23.Disassemble reverse shaft assembly:
A. Use a bearing puller to remove bearing (item 1)
from reverse shaft.
B. Remove 33T gear (item 2).
C. Use a bearing puller to remove bearing (item 3)
from reverse shaft.
4
3
2
1
Figure 51
24.Disassemble countershaft assembly:
A. Use a bearing puller to remove bearing (item 1)
from countershaft.
B. Removecollar(item2)andretainingring(item5).
C. Remove countershaft gear (item 3).
D. Removeretainingring (item6)andcollar(item4)
from shaft.
E. Use a bearing puller to remove two (2) bearings
(item 8) from shaft.
8
7
5
6
4
3
2
1
Figure 52
Drive Train