Multi Pro 1200/1250Page 7 -- 52Drive Train
14.Installreverseshaft (item1)into transaxle case.Ro-
tate main shaft and reverse shaft gears to mesh gears
when installing.
1
Figure 90
15.Install center plate onto transaxle:
A. Thoroughly clean mating surfaces of transaxle
case and center plate. Insert two (2) dowel pins into
transaxle case.
B. Apply silicone sealant onto mating surface of
centerplate.Carefullyinstallc enter plateontotrans-
axle case.
C. Installandtighten capscrews toatorqueof18 to
22 ft--lb (24.5 to 29.5 N--m) to secure center plate.
D. Apply multi--purpose grease onto lips of main
shaft oil seal. Insert oil seal into center plate flush
with face of housing.
18 to 22 ft--lb
(24.5 to 29.5 N--m)
Figure 91
To Next Page
Loading...
