Toro Multi Pro 1200 - Page 215

Multi Pro 1200/1250 Page 7 -- 53 Drive Train
IMPORTANT: The center plate uses one (1) tabbed
shim (item 4) with
three (3) tabless shims (item 3)
(Fig. 92).
NOTE: Thethickestshimoftheshimset(item3)s hould
be positioned against the retaining ring (Fig. 92).
16.Insert tabbed shim (item 4) against the bearing. In-
sertshimset(item3)againstthetabbedshim.Usethick-
est shims in set possible, that will permit installation of
the snap ring (Fig. 92 and 93).
1
3
2
4
Figure 92
1. Countershaft
2. Bearing
3. Shims
4. Retaining ring
5. Center plate
6. Sealing cap
Figure 93
1
5
3
6
4
2
17.Install retaining ring into the groove of the center
plate (Fig. 93 and 94).
Figure 94
Drive Train