Toro Power Max 1128 OXE 38828 - Replacing the Drive Belts; Replacing the Headlight Bulb

Note:Thelatchisspringloadedandwillnaturally
moveintotheteethofthegear(Figure51).
4.Removeanyslackinthecablebypullingthecable
conduitrearward.
5.Tightentheboltonthecableclamp.
6.Installandsecurethegearcover.
ReplacingtheDriveBelts
Iftheauger/impellerdrivebeltorthetractiondrivebelt
becomesworn,oil-soaked,orotherwisedamaged,goto
www.Toro.comforadditionalserviceinformationorhavean
AuthorizedServiceDealerreplacethebelt.
ReplacingtheHeadlightBulb
UseaGE89216Whalogenlightbulb.Donottouchthe
bulbwithyourhandsorallowdirtormoisturetocomeinto
contactwiththebulb.
1.Removethewireconnectorfromthebackofthe
headlight(Figure52).
Figure52
2.Turnthebaseofthebulbcounterclockwiseuntilit
stops(Figure53).
Figure53
3.Removethebulbstraightoutfromthebackofthe
headlight(Figure54).
Figure54
4.Insertanewbulbintothebackoftheheadlight
(Figure55).
Figure55
5.Turnthebaseofthebulbclockwiseuntilitissnug
(Figure56).
Figure56
6.Insertthewireconnectorstraightintothebackofthe
headlightuntilitissecurelyinplace(Figure57).
Figure57
24