Toro Recycler 21469 - Bagging the Clippings; Installing the Grass Bag; Removing the Grass Bag; Operating the Bag-on-Demand Lever

Bagging the Clippings
Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the bag-on-demand lever is in the recycling position, move it to the bagging position; refer to Operating the
Bag-on-Demand Lever ( page 15 ) .
Installing the Grass Bag
1. Raise and hold up the rear deector (A of Figure 13 ).
2. Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (B of Figure 13 ).
3. Lower the rear deector .
g334207
Figure 13
Removing the Grass Bag
T o remove the bag, reverse the steps in Installing the Grass Bag ( page 15 ) .
Operating the
Bag-on-Demand Lever
The bag-on-demand feature allows you to either
collect or recycle grass and leaf clippings while the
grass bag is attached to the machine.
• T o bag the grass and leaf clippings , press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
( Figure 14 ).
g251583
Figure 14
1. Bag-on-demand lever (in
the recycling position)
2. Bag-on-demand lever (in
the bagging position)
• T o recycle the grass and leaf clippings , press
the button on the lever and move the lever
rearward until the button on the lever pops up.
Important: For proper operation, remove
any grass clippings and debris from the
bag-on-demand door and the surrounding
opening ( Figure 15 ) before you move the
bag-on-demand lever from 1 position to
another .
g251584
Figure 15
1. Clean here
15