Toro Reelmaster 216-D - REELMASTER 216 Maintenance Schedule

REELMASTER
®
216 Maintenance Schedule
Minimum Recommended Maintenance Intervals:
Maintenance Procedure Maintenance Interval & Service
Check Battery Fluid/Connections
Lubricate Grease Fittings
Every
25hrs
Every
50hrs
Every
100hrs
Every
200hrs
Every
400hrs
Service Air Filter Pre-Cleaner
A Level
† Change Engine Oil
Service
† Check Traction Belt Tension B Level
Service Air Filter Paper Element
Service
Service Spark Plug C Level
† Torque Wheel Lug Nuts
Service
† Replace Hydraulic Filter
Adjust Electric Clutch D Level
Inspect Traction Linkage Movement
Service
Change Hydraulic Fluid
Decarbon Combustion Chamber
Adjust Valves and Torque Head Bolts E Level
‡ Check Engine RPM (idle and full throttle)
Service
† Initial break in at 5 hours
‡ Initial break in at 50 hours
Replace Moving Hoses
Replace Safety Switches
Fuel Tank - Drain/Flush
Annual Recommendations:
Items listed are recommended every 1000
hours or 2 years whichever occurs first.
Replace Fuel Filter
Hydraulic Tank - Drain/Flush
(See Operator's and Service Manual for specifications and procedures)