_______________________________ _______________________________
______________________________ _______________________________ _______________________________
______________________________ _______________________________ _______________________________
_____________________________ _______________________________ _______________________________
______________________________ _______________________________ _______________________________
______________________________ _______________________________ _______________________________
______________________________
______________________________ _______________________________ _______________________________
______________________________ _______________________________ _______________________________
______________________________ _______________________________ _______________________________
______________________________ _______________________________ _______________________________
REELMASTER
®
Date:______________ 216 Supervisor Maintenance Work Order
(duplicate this page for routine use)
Unit Designation: TORO I.D. #: Remarks:
____________-____________
Service to perform (circle):
A B C D E Other
Technician:
A B C
Check Battery Fluid/Connections Check Traction Belt Tension Service Spark Plug
Lubricate Grease Fittings Service Air Filter Paper Element Torque Wheel Lug Nuts
Service Air Filter Pre-Cleaner
A-Service required A and B Service required
Change Engine Oil
_
D
E - Service (every 400 hours)
Other
Replace Hydraulic Filter Change Hydraulic Fluid Replace Moving Hoses
Adjust Electric Clutch Decarbon Combustion Chamber Replace Safety Switches
Inspect Traction Linkage Movement Adjust Valves and Torque Head Bolts Fuel Tank - Drain/Flush
A, B, and C Service required
Check Engine RPM (idle & full throttle) Replace Fuel Filter
A, B, C, and required
Hydraulic Tank - Drain/Flush
Hours:
-Service (every 25 hours) -Service (every 50 hours) -Service (every 100 hours)
-Service (every 200 hours) - Annual Service and Specials
D Service
(See Operator's and Service Manual for specifications and procedures) Form No. 95-845-SL