Special Tools
NOTE: Order special tools from the
TORO SPECIAL
TOOLS AND APPLICATIONS GUIDE (COMMERCIAL
PRODUCTS)
. Some tools may be listed in the Reel-
master 216 or Reelmaster 216-D Parts Catalog. Some
tools may also be available from a local supplier.
Handle Assembly (Fig. 1)
For applying lapping compound to cutting units while
keeping hands a safe distance from the rotating reel
assembly.
Figure 1
Bedknife Screw Tool (Fig. 2)
Fits Toro bedknife attaching screws. Use with torque
wrench to secure bedknife to bedbar. With clean bedbar
threads and new screws, tighten to a torque of 200 in-lb.
NOTE: Remove all rust, scale and corrosion from bed-
bar surface before installing bedknife.
DO NOT use an air impact wrench with this tool.
Figure 2
Reelmaster
®
216/216-D Page 9 - 3 Special Tools
To Next Page
Loading...
