EasyManua.ls Logo

Toro REELMASTER 2300-D - Maintenance

Toro REELMASTER 2300-D
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Initial break in at 10 hours
✝✝Initial break in at 50 hours
22
Maintenance
Replace moving hoses
Replace safety switches
Flush cooling the cooling system and replace hoses
Replace the thermostat
Drain and flush the fuel tank
Drain and flush the hydraulic tank
Replace hydraulic fluid
Check battery level and connections
Inspect the traction linkage movement
✝✝Torque the head bolts and adjust the valves
✝✝Check the engine RPM (idle and full throttle)
Service the air filter
Replace the fuel filter
Replace the hydraulic filter
Torque the wheel lug nuts
Change the engine oil filter
Check the traction belt’s tension
Inspect the air filter, dust
cap and burp valve
Lube all grease fittings
Change engine oil
Check engine belt tension
Every
400 hours
Every
200 hours
Every 100
hours
Every 50
hours
Minimum Recommended Maintenance Intervals
Annual Recommendations:
Items are recommended every 1000 hours or
two years, whichever occurs first.

Other manuals for Toro REELMASTER 2300-D

Related product manuals