111-1033TH051006
GRASS CUTTING FAULTS
FAULT
POSSIBLE CAUSE
REMEDY
GRASS CUTTING FAULTS Continued.
Excessive bottom blade
wear..
Bottom blade in heavy ground contact.
Cutting edges of the cutting cylinder/
bottom blade are rounded.
Cylinder is in heavy contact with the
bottom blade.
Damaged cutting cylinder or bottom
blade.
Excessively abrasive ground conditions.
Raise height of cut.
Backlap or regrind to restore
cutting edges.
Readjust the cutting cylinder to
the bottom blade.
Regrind or replace as necessary.
Raise height of cut.
1.67
1.67
To Next Page
Loading...
