Reelmaster 3550--DPage 5 -- 12Electrical System
Diagnostic Display Inputs
Diagnostic Display LED Operation
ENGINE TEMP (A) Engine coolant temperature, switch and circuit wiring OK: LED ON
Coolant temperature, switch or circuit wiring faulty: LED OFF
PBRAKEOFF Parking brake released: LED ON
Parking brake applied: LED OFF
NEUTRAL Traction pedal in neutral: LED ON
Traction pedal in forward or reverse: LED OFF
LOWER REEL Lower/raise control lever in LOWER position: LED ON
Lower/raise control lever NOT in LOWER position: LED OFF
LIFT REEL Lower/raise control lever in RAISE position: LED ON
Lower/raise control lever NOT in RAISE position: LED OFF
PTO Enable/disable switch in ON position (pulled out): LED ON
Enable/disable switch in OFF position (pushed in): LED OFF
MOW Mow/transport slide in the MOW position: LED ON
Mow/transport slide in the TRANSPORT position: LED OFF
ALTERNATOR L Engine not running OR alternator faulty: LED ON
Alternator OK: LED OFF
ENGINE OIL PRESSURE Engine not running OR low engine oil pressure: LED ON
Engine oil pressure OK: LED OFF
SEAT Operator seat occupied: LED ON
Operator seat empty: LED OFF
BACKLAP Cutting r eels in backlap position: LED ON
Cutting reels NOT in backlap position: LED OFF
NOTE: When the ignition switch is in the OFF position,
all Diagnostic Display LED’s should be OFF.
To Next Page
Loading...
