Reelmaster 3550-D/3555-D/3575-DPage 6 - 8Chassis
9. Lower wheel to ground. Torque wheel lug nuts from
70 to 90 ft-lb (95 to 122 N-m) in a crossing pattern.
10.Torque lock nut from 250 to 275 ft-lb (339 to 372
N-m). Release parking brake.
11.Check brake adjustment and adjust if necessary
(see Adjust Brakes in the Adjustments section).
1. Return spring
2. Brake shoe (toe end)
3. Brake shoe (heel end)
4. Backing plate
5. Retaining clip
6. Cam shaft
7. Anchor pin
Figure 6
1
4
7
3
2
5
66
Burnish Brake Pads
After brake pad replacement, burnish (break-in) the
brakes before use.
1. Bringthemachinet o fullspeed andapplythebrakes
to rapidly stop the machine without skidding or locking
up the wheels.
2. Repeat this procedure 10 times. To avoid overheat-
ing the brakes, wait 1 minute between each stop.
To Next Page
Loading...
