Servicing the Air Cleaner (continued)
G448875
Engine Oil Specifications
Oil Type
Use high-quality, low-ash engine oil that meets or exceeds API service category CH-4 or
higher.
Use the following engine oil viscosity grade:
• Preferred oil: SAE 15W-40 [-17°C (above 0°F)]
• Alternate oil: SAE 10W-30 or 5W-30 (all temperatures)
Toro Premium Engine Oil is available from your authorized Toro distributor in either 15W-40
or 10W-30 viscosity grades.
Crankcase Capacity
Approximately 3.3 L (3.5 US qt) with the filter
Checking the Engine Oil Level
Note: Check the oil when the engine is cool. If the engine is warm, wait 10 minutes before
checking.
Maintenance: Engine Maintenance Page 6–15 3464-478 A
To Next Page
Loading...
