Toro Reelmaster 5100-D - Page 268

8. Apply clean multi-purpose grease to the face of the
upper cover plate, input shaft and face seal (Fig. 70).
Figure 70
9. Assemble the seal back-up ring and face seal onto
the seal spacer (Fig. 71).
Figure 71
10. Install the face seal, back-up ring and spacer assem-
bly over the end of the input shaft and onto the upper
cover plate (Fig. 72).
Figure 72
Repairs Page 7 - 38 Reelmaster
®
223-D/5100-D/5300-D