Toro Reelmaster 5210 - Crosstrax TM AWD (Optional Kit) Manifold Service

Reelmaster 5010 SeriesHydraulic System (Rev. C) Page 4 -- 94
CrossTrax
TM
AWD (Optional Kit) Manifold Service
1. AWD manifold
2. O--ring
3. Plug (NWD #6)
4. Seal kit
5. Check valve
6. Plug (NWD #4)
7. O--ring
8. Orifice (.040)
9. Plug (NWD #8)
10. O--ring
11. Seal kit
12. Bi--Directional relief valve
Figure 80
4
3
1
2
9
10
11
8
5
6
7
12
2
2
3
3
4
5
6
7
(33 N--m)
25 ft--lb
(33 N--m)
25 ft--lb
120 in--lb
(13.5 N--m)
(62 N--m)
46 ft--lb
220 in--lb
(24.8 N--m)
220 in--lb
(24.8 N--m)
220 in--lb
(24.8 N--m)
ForAWDcontrolmanifoldserviceprocedures,seeMow
Control Manifold Service in this section.Refer to Figure
80 for cartridge valve installation torque.
NOTE: Adjustment of Bi--Directional Relief Valve is
NOT recommended.