Toro Reelmaster 5410-D - Checking Hydraulic-Fluid Level; Checking Hydraulic Lines and Hoses; Changing the Hydraulic Fluid

HighViscosityIndex/LowPourPoint
Anti-wearHydraulicFluid,ISOVG46(cont'd.)
ViscosityIndexASTMD2270
140orhigher
PourPoint,ASTMD97-37°Cto-45°C(-34°F
to-49°F)
IndustrySpecications:EatonVickers694(I-286-S,
M-2950-S/35VQ25or
M-2952-S)
Note:Manyhydraulicuidsarealmostcolorless,
makingitdifculttospotleaks.Areddyeadditivefor
thehydraulicuidisavailablein20ml(0.67oz)
bottles.Abottleissufcientfor15to22L(4to6US
gallons)ofhydraulicuid.OrderPartNo.44-2500
fromyourauthorizedTorodistributor.
Important:ToroPremiumSynthetic
BiodegradableHydraulicFluidistheonly
syntheticbiodegradableuidapprovedbyToro.
Thisuidiscompatiblewiththeelastomersused
inTorohydraulicsystemsandissuitablefora
wide-rangeoftemperatureconditions.Thisuidis
compatiblewithconventionalmineraloils,butfor
maximumbiodegradabilityandperformance,the
hydraulicsystemshouldbethoroughlyushedof
conventionaluid.Theoilisavailablein19L(5
USgallons)pailsor208L(55USgallons)from
yourauthorizedTorodistributor.
Checkingthe
Hydraulic-FluidLevel
ServiceInterval:Beforeeachuseordaily
Thereservoirislledatthefactorywithhigh-quality
hydraulicuid.Thebesttimetocheckthehydraulic
oiliswhentheuidiscold.Themachineshouldbein
itstransportconguration.
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page61).
2.Cleantheareaaroundthellerneckandthe
capofthehydraulictank(Figure145).
g376007
Figure145
1.Fullmark(dipstick)2.Addmark(dipstick)
3.Removethecap/dipstickfromthellerneckand
wipeitwithacleanrag.
4.Insertthedipstickintothellerneck;then
removeitandcheckthelevelofuid.
Note:Theuidlevelshouldbewithinoperating
rangeonthedipstick.
Important:Donotoverllthetank.
5.Ifthelevelislow,addtheappropriateamountof
uidtoraisetheleveltothefullmark.
6.Installthecap/dipstickontothellerneck.
CheckingtheHydraulic
LinesandHoses
ServiceInterval:Beforeeachuseordaily
Checkthehydrauliclinesandhosesforleaks,kinked
lines,loosemountingsupports,wear,loosettings,
weatherdeterioration,andchemicaldeterioration.
Makeallnecessaryrepairsbeforeoperating.
HydraulicFluidCapacity
30L(8USgallons);refertoHydraulicFluid
Specications(page81)
ChangingtheHydraulic
Fluid
ServiceInterval:Every2,000hours—Ifyou
areusingtherecommended
hydraulicuid,changethe
hydraulicuid.
82