Toro Reelmaster 5410-D - Checking for Hydraulic Leaks

g376340
Figure148
1.Returnlter
2.Filterhead
3.Removethelter.
4.Wipecleantheltermountingareaofthelter
head.
5.Applyathincoatofthespeciedhydraulicuid
tothegasketofthenewreturnlter.
6.Threadthelterontothelterheadbyhanduntil
thegasketcontactsthemountingsurface,then
rotatethelteranadditional1/2turn.
ChangingtheChargeFilter
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page61).
2.Tilttheseat;refertoTiltingtheSeat(page62).
3.Attheleftsideofthemachine,alignadrainpan
underthechargelter(Figure149).
g422076
Figure149
1.Filterhead
2.Chargelter
4.Removethelter.
5.Wipecleantheltermountingareaofthelter
head.
6.Applyathincoatofthespeciedhydraulicuid
tothegasketofthenewchargelter.
7.Threadthelterontothelterheadbyhanduntil
thegasketcontactsthemountingsurface,then
rotatethelteranadditional1/2turn.
8.Lowerandlatchtheseat;refertoLoweringthe
Seat(page62).
CheckingforLeaks
1.Starttheengineandrunitfor2minutestopurge
airfromthehydraulicsystem.
2.Shutofftheengine,removethekey,andcheck
forleaksatthereturnandchargelters.
Note:Repairallhydraulicleaks.
84