Cutting Units
Rev. D
Reelmaster 5500-D Page 8 - 3 Cutting Units
Special Tools
Order special tools from your Toro Distributor. Some
tools may have been supplied with your machine or
available as TORO parts. Some tools may also be avail-
able from a local supplier.
Gauge Bar Assembly
Use gauge bar to verify height of cut and bedknife atti-
tude.
Toro P/N 98-1852
Figure 2
Angle Indicator
Use with Gauge Bar Assembly to verify bedknife atti-
tude.
Toro P/N 99-3503
Figure 3
Handle Assembly - TOR299100
For applying lapping compound to cutting units while
keeping hands a safe distance from the rotating reel.
Figure 4
To Next Page
Loading...
