Toro Reelmaster 5510 - Page 190

TestProcedure(continued)
2.Ensurethatthehydraulictankisfull.
3.ReadallWarning,Cautions,andprecautionslistedatthebeginningofthis
section.
CAUTION
Beforeopeninghydraulicsystem,operateallhydrauliccontrolsto
relievesystempressureandavoidinjuryfrompressurizedhydraulic
uid;refertoReleasingPressurefromtheHydraulicSystem(page
6–8).
4.Ensurethatthetractionpedalisadjustedtotheneutralposition.Also,ensure
thatthetractionpumpisatfullstrokewhentractionpedalispushedinto
fullyforwardposition.
5.Raiseandsupportmachinesoallwheelsareofftheground;refertoJacking
Instructions(page1–6).
g230040
Figure92
2-wheeldrivemachine
1.Tractionpump
3.Hydraulichose(forward)5.Hydraulichose(reverse)
2.Rightelbowtting4.Leftelbowtting
6.Cleanjunctionofhydraulichoseandrightsidettingonbottomoftraction
pump(Figure92).Disconnecthosefromrightsidepumptting.
IMPORTANT
Ensurethattheuidowindicatorarrowontheowmeteris
showingthattheuidwillowfromthepump,throughthetester,
andintothedisconnectedhydraulichose.
7.Installtesterwithpressuregaugeandowmeterinseriesbetweentraction
pumpttinganddisconnectedhosetoallowowfromtractionpumptotester.
Usehydraulichosekit;refertoSpecialTools(page6–44)toconnecttesterto
machine.Ensurethatthettingandhoseconnectionsareproperlytightened.
Also,ensurethattheowcontrolvalveontesterisfullyopen.
HydraulicSystem:TestingtheHydraulicSystem
Page6–72
Reelmaster
®
5410/5510/5610Series
15216SLRevC