InstallingtheGearBoxAssembly(continued)
IMPORTANT
Thegroomergearboxinstalledontheleftsideofthecuttingunituse
aleft-handthread.Turntheinputshaft(rearrollerbrushdriveshaft)
counterclockwisetoinstallthegearbox.Thegroomergearbox
installedontherightsideofthecuttingunitusearight-handthread.
Turntheinputshaftclockwisetoinstallthegearbox.
3.Installthegearboxtothecuttingunitasfollows:
A.Applymediumstrengththreadlockertotheinputshaftthreadsandturn
theinputshaftcounterclockwiseuntilitisseatedagainstthereel.
B.Installanewcotterpinandclevispinandsecuretheheightadjustment
rodtothefrontofthegroomergearbox.
C.Tightentheinputshaftto136to149N∙m(100to110ft-lb).
4.Installtherearrollerbrushdriveshieldifpreviouslyremoved.
Note:Ifthecuttingunitisequippedwithanoptionalpoweredrearroller
brush,installtherearrollerbrushdrivehousingassembly,drivebelt,and
cover;refertoRearRollerBrush–Optional(cuttingunitswithpaintedside
plates)(page9–51)foradditionalinformation.
5.Installthegroomerreelassembly;refertoInstallingtheGroomerReel(page
11–14).
UniversalGroomer(Optional):ServiceandRepairs
Page11–10
Reelmaster
®
5410/5510/5610Series
15216SLRevC
To Next Page
Loading...
