Overview of the InfoCenter Display
The InfoCenter display shows information about your machine such as the operating status,
various diagnostics and other information about the machine. There are multiple screens on
the display. You can switch between the screens, at any time, by pressing the back button
and then using the up and down directional buttons.
G471371s
Indicator light
Display brightness
sensor
Navigation button
—up
Back button
Navigation button
—decrease/left
Navigation button
—down
Navigation button
—increase/right
Enter button
Note: The purpose of each button may change depending on what is required at the time.
Each button is labeled with an icon displaying its current function.
InfoCenter Display Icons
Service is due. Warm-up mode
Virtual pedal stop
settings
Battery voltage
The glow plugs are
active.
Fuel level
Sit in the seat. Fuel is low.
The parking brake is
engaged.
Locked
3464-490A Page 5–5 Operation: Before Operation
To Next Page
Loading...
