Overview of the InfoCenter Display (continued)
Overview of the Menus
To access the InfoCenter display menu system, press the back button while at the main
screen. This brings you to the main menu. Refer to the following tables for a synopsis of the
options available from the menus.
Protected under Protected Menus—accessible only by entering PIN
Main Menu
Menu Item Description
Faults The Faults menu contains a list of the recent
machine faults. Refer to the Service Manual or
contact your authorized Toro distributor for more
information on the Faults menu and the
information contained there.
Service The Service menu contains information on the
machine such as hours of use, counters, and
other similar numbers.
Diagnostics The Diagnostics menu displays the state of
each machine switch, sensor, and control
output. You can use this to troubleshoot certain
issues as it quickly tells you which machine
controls are on and which are off.
Settings The Settings menu allows you to customize and
modify configuration variables on the display.
Machine Settings The Machine Settings menu allows you to
adjust the acceleration, speed, and
counterbalance thresholds.
About The About menu lists the model number, serial
number, and software version of your machine.
Service
Menu Item Description
Hours Lists the total number of hours that the machine,
engine and PTO have been on, as well as the
number of hours the machine has been
transported and service due.
Counts Lists numerous counts the machine has
experienced.
Service RPM Sets service RPM.
Traction Pedal Calibrates the traction pedal.
Traction Pump Calibrates the traction pump.
Virtual Speed Sensor Calibrates the virtual speed sensor.
3464-490A Page 5–7 Operation: Before Operation
To Next Page
Loading...
