Overview of the InfoCenter Display (continued)
Diagnostics
Menu Item Description
Traction Indicates the inputs and outputs for the traction
pedal.
Cutting Units Indicates the inputs and outputs for raising and
lowering the cutting units.
PTO Indicates the inputs and outputs for enabling the
PTO circuit.
Engine Indicates the inputs and outputs for starting the
engine.
CAN Statistics Indicates the inputs and outputs for the CAN.
Settings
Menu Item Description
Enter PIN Allows a person (superintendent/mechanic)
authorized by your company with the PIN code
to access protected menus.
Backlight Controls the brightness of the LCD display.
Language Controls the language used on the display*.
Font Size Controls the size of the font on the display.
Units Controls the units used on the display (Imperial
or Metric).
Protect Settings Allows the ability to change the settings in the
protected settings
*Only "operator-faced" text is translated. Faults, Service, and Diagnostics screens are
"service-faced.” Titles are in the selected language, but menu items are in English.
Machine Settings
Menu Item Description
Front Backlap Controls the speed of the front reels in backlap
mode.
Rear Backlap Controls the speed of the rear reels in backlap
mode.
Mow Speed Controls the maximum speed while in mow (low
range). This is used for determining the reel
speed.
Transport Speed Controls the maximum speed while in transport
(high range).
Operation: Before Operation Page 5–8 3464-490 A
To Next Page
Loading...
