Overview of the InfoCenter Display (continued)
Machine Settings (continued)
Menu Item Description
Blade Count Controls the number of blades on the reel for
reel speed.
Height of cut (HOC) Controls the height of cut (HOC) for determining
the reel speed.
Front Reel Speed Displays the calculated reel speed position for
the front reels. The reels can also be manually
adjusted.
Rear Reel Speed Displays the calculated reel speed position for
the rear reels. The reels can also be manually
adjusted.
Acceleration Low, Medium, and High settings control how
quickly the traction speed reacts when you
move the traction pedal.
About
Menu Item Description
Model Lists the model number of the machine.
SN Lists the serial number of the machine.
S/W Revision Lists the software revision of the primary
controller.
InfoCenter S/W Revision Lists the software revision of the InfoCenter.
Accessing Run Screens
1. From the Main Menu, press the right navigation button to access the Main Run Screen
displaying the fuel level and coolant temperature.
2. Press the right navigation button to scroll to the Secondary Run Screen displaying the
fuel level, coolant temperature, hours, battery voltage, and RPMs.
Protected Menus
There are operating configuration settings that are adjustable within Settings of the display.
To lock these settings, use the Protected Menu.
Note: At the time of delivery, the initial password code is programmed by your distributor.
Accessing Protected Menus
Note: The factory default PIN code for you machine is either 0000 or 1234.
If you changed the PIN code and forgot the code, contact your authorized Toro distributor for
assistance.
3464-490A Page 5–9 Operation: Before Operation
To Next Page
Loading...
