Overview of the InfoCenter Display (continued)
G471349s
1. From the Main Menu, scroll down to Settings
and press the select button.
G471350s
2. In Settings, scroll to Enter PIN and press the
select button
.
3. To enter the PIN code, press the up/down
navigation buttons
until the correct first digit
appears, then press the right navigation button
to move on to the next digit. Repeat this
step until the last digit is entered.
4. Press the select button
.
Note: If the display accepts the PIN code and
the protected menu is unlocked, the word
“PIN” displays in the upper right corner of the
screen.
5. To lock the protected menu, rotate the key
switch to the O
FF position and then to the ON
position.
Viewing and Changing the Protected Menu Settings
1. In Settings, scroll down to Protect Settings.
2. To view and change the settings without entering a PIN code, use the select button to
change the Protect Settings to (Off).
3. To view and change the settings with a PIN code, use the select button to change the
Protect Settings to (On), set the PIN code, and turn the key in the ignition switch to
the O
FF position and then to the ON position.
Setting the Service Due Timer
The service due timer resets the service due hours after a scheduled maintenance
procedure is performed.
Operation: Before Operation Page 5–10 3464-490 A
To Next Page
Loading...
