Sand Pro 2040Z Page 4 - 3 Hydraulic System
General Information
Operator’s Manual
The Operator’s Manual provides information regarding
the operation, general maintenance a nd maintenance
intervals for your Sand Pro 2040Z machine. Refer to that
publication for additional information when servicing the
machine.
Check Hydraulic Fluid
The Sand Pro 2040Z hydraulic system is designed to
operate on anti- wear hydraulic fluid. Two (2) hydraulic
reservoirs are used on the Sand Pro: one for each of the
dual transmissions. The right side reservoir capacity is
approximately 2.1 U.S. quarts (2.0 liters) and the left
side reservoir capacity is approximately 2.0 U.S. quarts
(1.9 liters). Check level of hydraulic f luid daily. See
Operator’s Manual for fluid level checking procedure
and oil recommendations.
IMPORTANT: DO NOT overfill the hydraulic reser-
voirs.
1. RH hydraulic reservoir
2. LH hydraulic reservoir
3. Oil level
Figure 1
1
2
3
3
1. Reservoir (RH shown)
2. Reservoir bracket
3. Oil level
4. Reservoir cap
Figure 2
2
1
3
4
Hydraulic
System
To Next Page
Loading...
