Toro Sand Pro 3040 - Lift Control Valve

LiftControlValve
g352024
Figure59
(standardrearliftvalveshown)
1.Capscrew(2each)10.Capscrew(2each)
2.Flatwasher(2each)11.Locknut(3each)
3.Leverguideplate12.Rightsidewheelshroud
4.Rollpin
13.Liftcontrolvalve
5.Liftlever14.Capscrew(4each)
6.Curvedwasher15.Capscrew(3each)
7.Liftleverpivot
16.Pivotbracket
8.Offsetlink17.Cotterpin
9.Locknut(2each)
Thefollowingproceduresapplytothestandardrearliftvalveandtheoptional
frontliftvalve(kitmodelno08712).
RemovingtheLiftControlValves
RefertoFigure59forthisprocedure.
1.Parkthemachineonalevelsurface,loweranyattachments,setthekey
switchtotheOFFpositionandremovethekeyfromtheswitch.
2.Removetheconsolefromthemachine;refertoRemovingandInstalling
theOperator’sConsole(page7–24).
3.Removetherightsidewheelshroud.
4.Removethefastenerssecuringtheleverguideplatetotheframeandremove
theguideplatefromthemachine.
SandPro
®
3040and5040
Page5–89
HydraulicSystem:ServiceandRepairs
20251SLRevA