Toro SnowMaster 724 ZXR 36001 - Installing the Discharge Chute; Filling the Engine with Oil

2
InstallingtheDischargeChute
Partsneededforthisprocedure:
1
Bolt(1/4–20X1.50inch)
1
Washer-facedlocknut(1/4–20inch)
Procedure
Insertthechutepostthroughthebracketintothebaseofthe
machineandsecureitusingaboltandalocknut(Figure4).
Figure4
1.Chutepost3.Washer-facedlocknut
(1/4–20inch)
2.Bolt(1/4–20X1.50inch)
4.Bracket
3
FillingtheEnginewithOil
NoPartsRequired
Procedure
Yourmachinecomeswithoilintheengine.
Model
Maxll
36001
17oz(0.5L)
Oiltype:automotivedetergentoilwithanAPIservice
classicationofSJ,SL,orhigher.
UseFigure5belowtoselectthebestoilviscosityforthe
outdoortemperaturerangeexpected:
Figure5
1.Movethemachinetoalevelsurface.
2.Cleanaroundtheoilllcap.
3.Checktheoillevelandaddoilifnecessary.
Note:Donottightenthedipstickwhencheckingthe
oillevel.
5