Leveling the Mower Deck (continued)
Checking the Mower-Deck Level
G414698
1. Position the blades side-to-side.
2. Measure at locations
and from a level
surface to the cutting edge of the blade tips
.
The difference between the measurements
should be no more than 5 mm (3/16 inch). If
the measurement is larger, adjust the side-to-
side level.
G414700
3. Position 1 blade front-to-rear.
4. Measure at locations
and from a level
surface to the cutting edge of the blade tips
.
The front blade tip should be 1.6 to 7.9 mm (1/
16 to 5/16 inch) lower than the rear blade tip. If
the measurement is not correct, adjust the
front-to-rear level.
Maintenance: Mower-Deck Maintenance Page 5–27 3464-628 A
To Next Page
Loading...
