Air Cleaner Service (continued)
Servicing the Foam Element
1. Wash the foam element in liquid soap and warm water. When the element is clean, rinse
it thoroughly.
2. Dry the element by squeezing it in a clean cloth.
IMPORTANT
Replace the foam element if it is torn of worn.
3. Lightly oil the foam element using new engine oil and squeeze out any excess oil.
Servicing the Paper Air-Cleaner Element
1. Clean the paper element by tapping it gently to remove dust.
Note: If it is very dirty, replace the paper element with a new one.
2. Inspect the element for tears, an oily film, or damage to the rubber seal.
3. Replace the paper element if it is damaged.
IMPORTANT
Do not clean the paper filter.
Installing the Air Cleaner Elements
G451670
1. Install the foam pre-cleaner element over the
paper element.
Note: Ensure that you do not damage the
elements.
2. Install the air-cleaner elements onto the air-
cleaner base.
G456142
3. Install the cover and secure it with the
retaining clamps
.
Maintenance: Engine Maintenance Page 5–6 3464-634 A
To Next Page
Loading...
