Toro TITAN HD Series - Removing the Machine from the Crate; Adding Fuel to the Machine; Checking the Engine-Oil Level; Servicing the Hydraulic Oil

1
RemovingtheMachinefrom
theCrate
NoPartsRequired
Procedure
Ifremovingthemachinefromametalcrate,refertothe
Dealer/DistributorPortalforfurtherinformation.
2
AddingFueltotheMachine
NoPartsRequired
Procedure
Addfueltothemachinebeforestartingit.Refertoyour
Operator’sManualforthecorrectfuelandprocedure.
3
CheckingtheEngine-OilLevel
NoPartsRequired
Procedure
Beforeyoustarttheengineandusethemachine,check
theoillevelintheenginecrankcase;refertoServicingthe
Engine-OilLevelintheOperator'sManual.
4
ServicingtheHydraulicOil
NoPartsRequired
Procedure
Thismachineisshippedlledwithhydraulicuidinthe
reservoirs.
Checktheexpansiontank;ifnecessary,addToro
®
HYPR-OIL
™
500hydraulicuid,asrecommendedinthe
Operator'sManual,totheFULLCOLDline(Figure1).
Figure1
1.Engine2.Expansiontank
2