HYDROSTATIC DRIVE SYSTEM
7-18 2007 - 2008 Titan Z Service Manual
7
12. Remove the brake pivot tube (Fig. 418).
11. Remove the spacer from the inside end of the brake
pivot tube (Fig. 417).
Fig. 417 IMG-0293a
Fig. 418 IMG-0294a
10. Remove the washer located on the inside end of the
brake pivot tube (Fig. 416).
9. Pull the brake pivot tube assembly out slightly from
the frame (Fig. 415).
Fig. 415 IMG-0291a
Fig. 416 IMG-0292a
To Next Page
Loading...
