HYDROSTATIC DRIVE SYSTEM
7-22 2007 - 2008 Titan Z Service Manual
7
Brake Linkage & Brake Handle Assembly
Installation
3. Install a nut securing the left hand end of the brake
shaft to the transmission and frame (Fig. 432).
Fig. 432 IMG-0533
4. Install the left side spring anchor plate onto the left
brake handle clevis pin. Install a cotter pin to secure
(Fig. 433).
Fig. 433 IMG-0538
1. Position the brake shaft to the transmission and
frame (Fig. 430).
Fig. 430 IMG-0535a
2. Install a nut securing the right hand end of the brake
shaft to the transmission and frame (Fig. 431).
Fig. 431 IMG-0534
To Next Page
Loading...
