Toro Titan Z5200 - Page 152

HYDROSTATIC DRIVE SYSTEM
7-252007 - 2008 Titan Z Service Manual
7
13. Slide the brake pivot tube about half way through the
ÀDQJHEXVKLQJV)LJ
15. Install a washer on the inside end of the brake pivot
tube (Fig. 444).
Fig. 442 IMG-0314
14. Install a spacer on the inside end of the brake pivot
tube (Fig. 443).
Fig. 443 IMG-0315a
Fig. 444 IMG-0316a
 6OLGHWKHEUDNHSLYRWWXEHIDUWKHUWKURXJKWKHÀDQJH
bushings, spacer and washer and into the slots
located on the bell crank (Fig. 445).
Fig. 445 IMG-0317