Toro Titan Z5200 - Page 153

HYDROSTATIC DRIVE SYSTEM
7-26 2007 - 2008 Titan Z Service Manual
7
20. Install a nut on the end of the carriage bolt to secure
(Fig. 449).
Fig. 449 IMG-0323a
17. Install a spacer on the outside end of the brake pivot
tube (Fig. 446).
19. Slide a carriage bolt through the brake pivot tube
(Fig. 448).
Fig. 446 IMG-0319
18. Install the brake lever assembly on the outside end
of the brake pivot tube (Fig. 447).
Fig. 447 IMG-0289a
Fig. 448 IMG-0288