Toro Titan Z5200 - Drive System and Mower Maintenance; Checking Tire Pressure; Servicing Cutting Blades

CHASSIS
3-24 2007 - 2008 Titan Z Service Manual
3
16. Push the rubber wire harness grommet through the
right side of the seat box assembly (Fig. 083).
17. Push the wire harness through the hole (on the right
side of the seat box assembly) (Fig. 084).
18. Push the two wire clamps through the right side of
the seat box to free the harness from the seat box
(Fig. 085).
Fig. 083 IMG-0236
Fig. 084 IMG-0237
Fig. 085 IMG-0238
19. Remove the two bolts, washers and nuts securing
the seat delay module to the inside of the seat box.
Remove the seat delay module from the seat box
(Fig. 086).
Fig. 086 IMG-0239